Daily Papers

A theoretical approach to describing transport of an entire ensemble of clusters with different sizes as a single species in gas has been developed. The major assumption is an existence of local partial chemical equilibrium between the clusters. It is shown that thermal diffusion emerges in the collective description as a significant factor even if it is negligible when transport of the original molecular species is considered. Analytical expressions for the effective diffusion and thermal diffusion coefficients at temperature, pressure, and chemical composition gradients have been derived. The theory has been applied to a technology of H2S conversion in a centrifugal plasma-chemical reactor and has made it possible to account for sulfur clusters in numerical process modeling.

A new type of cooperativity termed temporal cooperativity [Biophys. Chem. 105 585-593 (2003), Annu. Rev. Phys. Chem. 58 113-142 (2007)], emerges in the signal transduction module of phosphorylation-dephosphorylation cycle (PdPC). It utilizes multiple kinetic cycles in time, in contrast to allosteric cooperativity that utilizes multiple subunits in a protein. In the present paper, we thoroughly investigate both the deterministic (microscopic) and stochastic (mesoscopic) models, and focus on the identification of the source of temporal cooperativity via comparing with allosteric cooperativity. A thermodynamic analysis confirms again the claim that the chemical equilibrium state exists if and only if the phosphorylation potential triangle G=0, in which case the amplification of sensitivity is completely abolished. Then we provide comprehensive theoretical and numerical analysis with the first-order and zero-order assumptions in phosphorylation-dephosphorylation cycle respectively. Furthermore, it is interestingly found that the underlying mathematics of temporal cooperativity and allosteric cooperativity are equivalent, and both of them can be expressed by "dissociation constants", which also characterizes the essential differences between the simple and ultrasensitive PdPC switches. Nevertheless, the degree of allosteric cooperativity is restricted by the total number of sites in a single enzyme molecule which can not be freely regulated, while temporal cooperativity is only restricted by the total number of molecules of the target protein which can be regulated in a wide range and gives rise to the ultrasensitivity phenomenon.

The paper sets forth comprehensive basics of Discrete Thermodynamics of Chemical Equilibria (DTD), developed by the author during the last decade and spread over series of publications. Based on the linear equations of irreversible thermodynamics, De Donder's definition of the thermodynamic force, and the Le Chatelier principle, DTD brings forward a notion of chemical equilibrium as a balance of internal and external thermodynamic forces, acting against a chemical system. The basic expression of DTD is a logistic map that ties together energetic characteristics of the chemical transformation in the system, its deviation from true thermodynamic equilibrium, and the sum of thermodynamic forces, causing that deviation. System deviation from thermodynamic equilibrium is the major variable of the theory. Solutions to the basic map define the chemical system domain of states comprising bifurcation diagrams with four areas, from true thermodynamic equilibrium to chaos, having specific distinctive meaning for chemical systems. The theory is derived from the currently recognized ideas of chemical thermodynamics and binds classical and contemporary thermodynamics of chemical equilibria into a unique concept. DTD opens new opportunities in understanding and analysis of equilibria in chemical systems. Some new results, included in the paper, have never been published before.

Classical theories of chemical kinetics assume independent reactions in dilute solutions, whose rates are determined by mean concentrations. In condensed matter, strong interactions alter chemical activities and create inhomogeneities that can dramatically affect the reaction rate. The extreme case is that of a reaction coupled to a phase transformation, whose kinetics must depend on the order parameter -- and its gradients, at phase boundaries. This Account presents a general theory of chemical kinetics based on nonequilibrium thermodynamics. The reaction rate is a nonlinear function of the thermodynamic driving force (free energy of reaction) expressed in terms of variational chemical potentials. The Cahn-Hilliard and Allen-Cahn equations are unified and extended via a master equation for non-equilibrium chemical thermodynamics. For electrochemistry, both Marcus and Butler-Volmer kinetics are generalized for concentrated solutions and ionic solids. The theory is applied to intercalation dynamics in the phase separating Li-ion battery material Li_xFePO_4.

We present an escape rate theory for current-induced chemical reactions. We use Keldysh nonequilibrium Green's functions to derive a Langevin equation for the reaction coordinate. Due to the out of equilibrium electronic degrees of freedom, the friction, noise, and effective temperature in the Langevin equation depend locally on the reaction coordinate. As an example, we consider the dissociation of diatomic molecules induced by the electronic current from a scanning tunnelling microscope tip. In the resonant tunnelling regime, the molecular dissociation involves two processes which are intricately interconnected: a modification of the potential energy barrier and heating of the molecule. The decrease of the molecular barrier (i.e. the current induced catalytic reduction of the barrier) accompanied by the appearance of the effective, reaction-coordinate-dependent temperature is an alternative mechanism for current-induced chemical reactions, which is distinctly different from the usual paradigm of pumping vibrational degrees of freedom.

We show how to extract from a sufficiently long time series of stationary fluctuations of chemical reactions an estimate of the entropy production. This method, which is based on recent work on fluctuation theorems, is direct, non-invasive, does not require any knowledge about the underlying dynamics, and is applicable even when only partial information is available. We apply it to simple stochastic models of chemical reactions involving a finite number of states, and for this case, we study how the estimate of dissipation is affected by the degree of coarse-graining present in the input data.

Recent developments in deep learning have made remarkable progress in speeding up the prediction of quantum chemical (QC) properties by removing the need for expensive electronic structure calculations like density functional theory. However, previous methods learned from 1D SMILES sequences or 2D molecular graphs failed to achieve high accuracy as QC properties primarily depend on the 3D equilibrium conformations optimized by electronic structure methods, far different from the sequence-type and graph-type data. In this paper, we propose a novel approach called Uni-Mol+ to tackle this challenge. Uni-Mol+ first generates a raw 3D molecule conformation from inexpensive methods such as RDKit. Then, the raw conformation is iteratively updated to its target DFT equilibrium conformation using neural networks, and the learned conformation will be used to predict the QC properties. To effectively learn this update process towards the equilibrium conformation, we introduce a two-track Transformer model backbone and train it with the QC property prediction task. We also design a novel approach to guide the model's training process. Our extensive benchmarking results demonstrate that the proposed Uni-Mol+ significantly improves the accuracy of QC property prediction in various datasets. We have made the code and model publicly available at https://github.com/dptech-corp/Uni-Mol.

This chapter provides a pedagogical introduction and overview of spatial and temporal correlation and fluctuation effects resulting from the fundamentally stochastic kinetics underlying chemical reactions and the dynamics of populations or epidemics. After reviewing the assumptions and mean-field type approximations involved in the construction of chemical rate equations for uniform reactant densities, we first discuss spatial clustering in birth-death systems, where non-linearities are introduced through either density-limiting pair reactions, or equivalently via local imposition of finite carrying capacities. The competition of offspring production, death, and non-linear inhibition induces a population extinction threshold, which represents a non-equilibrium phase transition that separates active from absorbing states. This continuous transition is characterized by the universal scaling exponents of critical directed percolation clusters. Next we focus on the emergence of depletion zones in single-species annihilation processes and spatial population segregation with the associated reaction fronts in two-species pair annihilation. These strong (anti-)correlation effects are dynamically generated by the underlying stochastic kinetics. Finally, we address noise-induced and fluctuation-stabilized spatio-temporal patterns in basic predator-prey systems, exemplified by spreading activity fronts in the two-species Lotka-Volterra model as well as spiral structures in the May-Leonard variant of cyclically competing three-species systems akin to rock-paper-scissors games.

The paper has two goals: It presents basic ideas, notions, and methods for reduction of reaction kinetics models: quasi-steady-state, quasi-equilibrium, slow invariant manifolds, and limiting steps. It describes briefly the current state of the art and some latest achievements in the broad area of model reduction in chemical and biochemical kinetics, including new results in methods of invariant manifolds, computation singular perturbation, bottleneck methods, asymptotology, tropical equilibration, and reaction mechanism skeletonisation.

In this paper, we explore osmotic transport by means of molecular dynamics (MD) simulations. We first consider osmosis through a membrane, and investigate the reflection coefficient of an imperfectly semi-permeable membrane, in the dilute and high concentration regimes. We then explore the diffusion-osmotic flow of a solute-solvent fluid adjacent to a solid surface, driven by a chemical potential gradient parallel to the surface. We propose a novel non-equilibrium MD (NEMD) methodology to simulate diffusion-osmosis, by imposing an external force on every particle, which properly mimics the chemical potential gradient on the solute in spite of the periodic boundary conditions. This NEMD method is validated theoretically on the basis of linear-response theory by matching the mobility with their Green-Kubo expressions. Finally, we apply the framework to more realistic systems, namely a water-ethanol mixture in contact with a silica or a graphene surface.

The study demonstrates the capabilities of a vector-based approach for calculating stoichiometric coefficients in chemical equations, using black powder as an illustrative example. A method is proposed for selecting and constraining intermediate interactions between reactants, as well as for identifying final products. It is shown that even a small number of components can lead to a large number of final and intermediate products. Through concrete calculations, a correlation is established between the number of possible chemical equations and the number of reactants. A methodology is proposed for computing all possible chemical equations within a reaction system for arbitrary component ratios, enabling the derivation of all feasible chemical reactions. Additionally, a method is developed for calculating the chemical composition for a fixed set of reactants, allowing for the evaluation of the set of products resulting from all possible chemical interactions given a specified initial composition.

The principle of detailed balance states that in equilibrium each elementary process is equilibrated by its reverse process. For many real physico-chemical complex systems (e.g. homogeneous combustion, heterogeneous catalytic oxidation, most enzyme reactions etc), detailed mechanisms include both reversible and irreversible reactions. In this case, the principle of detailed balance cannot be applied directly. We represent irreversible reactions as limits of reversible steps and obtain the principle of detailed balance for complex mechanisms with some irreversible elementary processes. We proved two consequences of the detailed balance for these mechanisms: the structural condition and the algebraic condition that form together the extended form of detailed balance. The algebraic condition is the principle of detailed balance for the reversible part. The structural condition is: the convex hull of the stoichiometric vectors of the irreversible reactions has empty intersection with the linear span of the stoichiometric vectors of the reversible reaction. Physically, this means that the irreversible reactions cannot be included in oriented pathways. The systems with the extended form of detailed balance are also the limits of the reversible systems with detailed balance when some of the equilibrium concentrations (or activities) tend to zero. Surprisingly, the structure of the limit reaction mechanism crucially depends on the relative speeds of this tendency to zero.

All known up to now models of chemical oscillations are based exclusively on kinetic considerations. The chemical gross-process equation is split usually by elementary steps, each step is supplied by an arrow and a differential equation, joint solution to such a construction under certain, often ad hoc chosen conditions and with ad hoc numerical coefficients leads to chemical oscillations. Kinetic perception of chemical oscillations reigns without exclusions. However, as it was recently shown by the author for the laser and for the electrochemical systems, chemical oscillations follow also from solutions to the basic expressions of discrete thermodynamics of chemical equilibria. Graphically those solutions are various fork bifurcation diagrams, and, in certain types of chemical systems, oscillations are well pronounced in the bistable bifurcation areas. In this work we describe a general thermodynamic approach to chemical oscillations as opposite to kinetic models, and depict some of their new features like spontaneity and fractality. The paper doubts exclusivity of the kinetic approach to chemical oscillations, and its aim is to discuss and exemplify thermodynamically predicted chemical oscillations in closed chemical systems.

Central to our understanding of chemical reactivity is the principle of mass conservation, which is fundamental for ensuring physical consistency, balancing equations, and guiding reaction design. However, data-driven computational models for tasks such as reaction product prediction rarely abide by this most basic constraint. In this work, we recast the problem of reaction prediction as a problem of electron redistribution using the modern deep generative framework of flow matching. Our model, FlowER, overcomes limitations inherent in previous approaches by enforcing exact mass conservation, thereby resolving hallucinatory failure modes, recovering mechanistic reaction sequences for unseen substrate scaffolds, and generalizing effectively to out-of-domain reaction classes with extremely data-efficient fine-tuning. FlowER additionally enables estimation of thermodynamic or kinetic feasibility and manifests a degree of chemical intuition in reaction prediction tasks. This inherently interpretable framework represents a significant step in bridging the gap between predictive accuracy and mechanistic understanding in data-driven reaction outcome prediction.

We present a vector-based method to balance chemical reactions. The algorithm builds candidates in a deterministic way, removes duplicates, and always prints coefficients in the lowest whole-number form. For redox cases, electrons and protons/hydroxide are treated explicitly, so both mass and charge are balanced. We also outline the basic principles of the vector formulation of stoichiometry, interpreting reactions as integer vectors in composition space, this geometric view supports compact visualizations of reagent-product interactions and helps surface distinct reaction families. The method enumerates valid balances for arbitrary user-specified species lists without special-case balancing rules or symbolic tricks, and it provides a clean foundation for developing new algorithmic variants (e.g., alternative objectives or constraints). On representative examples (neutralization, double displacement, decomposition, classical redox, small multicomponent sets) and a negative control, the method produced correct integer balances. When multiple balances exist, we report a canonical one - minimizing the total coefficient sum with a simple tie-breaker - without claiming global optimality beyond the solutions the search enumerates. The procedure applies per reaction and extends to reaction networks via consistent per-reaction application. We do not report runtimes, broader benchmarking and code/data release are planned.

Knowledge of mixtures' phase equilibria is crucial in nature and technical chemistry. Phase equilibria calculations of mixtures require activity coefficients. However, experimental data on activity coefficients is often limited due to high cost of experiments. For an accurate and efficient prediction of activity coefficients, machine learning approaches have been recently developed. However, current machine learning approaches still extrapolate poorly for activity coefficients of unknown molecules. In this work, we introduce the SMILES-to-Properties-Transformer (SPT), a natural language processing network to predict binary limiting activity coefficients from SMILES codes. To overcome the limitations of available experimental data, we initially train our network on a large dataset of synthetic data sampled from COSMO-RS (10 Million data points) and then fine-tune the model on experimental data (20 870 data points). This training strategy enables SPT to accurately predict limiting activity coefficients even for unknown molecules, cutting the mean prediction error in half compared to state-of-the-art models for activity coefficient predictions such as COSMO-RS, UNIFAC, and improving on recent machine learning approaches.

Many examples of cooperation exist in biology. In chemical systems however, which can sometimes be quite complex, we do not appear to observe intricate cooperative interactions. A key question for the origin of life, is then how can molecular cooperation first arise in an abiotic system prior to the emergence of biological replication. We postulate that selection at the molecular level is a driving force behind the complexification of chemical systems, particularly during the origins of life. In the theory of multilevel selection the two selective forces are: within-group and between-group, where the former tends to favor "selfish" replication of individuals and the latter favor cooperation between individuals enhancing the replication of the group as a whole. These forces can be quantified using the Price equation, which is a standard tool used in evolutionary biology to quantify evolutionary change. Our central claim is that replication and heredity in chemical systems are subject to selection, and quantifiable using the multilevel Price equation. We demonstrate this using the Graded Autocatalysis Replication Domain computer model, describing simple protocell composed out of molecules and its replication, which respectively analogue to the group and the individuals. In contrast to previous treatments of this model, we treat the lipid molecules themselves as replicating individuals and the protocells they form as groups of individuals. Our goal is to demonstrate how evolutionary biology tools and concepts can be applied in chemistry and we suggest that molecular cooperation may arise as a result of group selection. Further, the biological relation of parent-progeny is proposed to be analogue to the reactant-product relation in chemistry, thus allowing for tools from evolutionary biology to be applied to chemistry and would deepen the connection between chemistry and biology.

The statistical mechanics of Gibbs is a juxtaposition of subjective, probabilistic ideas on the one hand and objective, mechanical ideas on the other. In this paper, we follow the path set out by Jaynes, including elements added subsequently to that original work, to explore the consequences of the purely statistical point of view. We show how standard methods in the equilibrium theory could have been derived simply from a description of the available problem information. In addition, our presentation leads to novel insights into questions associated with symmetry and non-equilibrium statistical mechanics. Two surprising consequences to be explored in further work are that (in)distinguishability factors are automatically predicted from the problem formulation and that a quantity related to the thermodynamic entropy production is found by considering information loss in non-equilibrium processes. Using the problem of ion channel thermodynamics as an example, we illustrate the idea of building up complexity by successively adding information to create progressively more complex descriptions of a physical system. Our result is that such statistical mechanical descriptions can be used to create transparent, computable, experimentally-relevant models that may be informed by more detailed atomistic simulations. We also derive a theory for the kinetic behavior of this system, identifying the nonequilibrium `process' free energy functional. The Gibbs relation for this functional is a fluctuation-dissipation theorem applicable arbitrarily far from equilibrium, that captures the effect of non-local and time-dependent behavior from transient driving forces. Based on this work, it is clear that statistical mechanics is a general tool for constructing the relationships between constraints on system information.

Macroscopic entropy production σ^{(tot)} in the general nonlinear isothermal chemical reaction system with mass action kinetics is decomposed into a free energy dissipation and a house-keeping heat: σ^{(tot)}=σ^{(fd)}+σ^{(hk)}; σ^{(fd)}=-rd A/rd t, where A is a generalized free energy function. This yields a novel nonequilibrium free energy balance equation rd A/rd t=-σ^{(tot)}+σ^{(hk)}, which is on a par with celebrated entropy balance equation rd S/rd t=σ^{(tot)}+η^{(ex)} where η^{(ex)} is the rate of entropy exchange with the environment.For kinetic systems with complex balance, σ^{(fd)} and σ^{(hk)} are the macroscopic limits of stochastic free energy dissipation and house-keeping heat, which are both nonnegative, in the Delbrück-Gillespie description of the stochastic chemical kinetics.Therefore, we show that a full kinetic and thermodynamic theory of chemical reaction systems that transcends mesoscopic and macroscopic levels emerges.

Can a micron sized sack of interacting molecules understand, and adapt to a constantly-fluctuating environment? Cellular life provides an existence proof in the affirmative, but the principles that allow for life's existence are far from being proven. One challenge in engineering and understanding biochemical computation is the intrinsic noise due to chemical fluctuations. In this paper, we draw insights from machine learning theory, chemical reaction network theory, and statistical physics to show that the broad and biologically relevant class of detailed balanced chemical reaction networks is capable of representing and conditioning complex distributions. These results illustrate how a biochemical computer can use intrinsic chemical noise to perform complex computations. Furthermore, we use our explicit physical model to derive thermodynamic costs of inference.

In this paper, a mathematical model is developed to describe the evolution of the concentration of compounds through a gas chromatography column. The model couples mass balances and kinetic equations for all components. Both single and multiple-component cases are considered with constant or variable velocity. Non-dimensionalisation indicates the small effect of diffusion. The system where diffusion is neglected is analysed using Laplace transforms. In the multiple-component case, it is demonstrated that the competition between the compounds is negligible and the equations may be decoupled. This reduces the problem to solving a single integral equation to determine the concentration profile for all components (since they are scaled versions of each other). For a given analyte, we then only two parameters need to be fitted to the data. To verify this approach, the full governing equations are also solved numerically using the finite difference method and a global adaptive quadrature method to integrate the Laplace transformation. Comparison with the Laplace solution verifies the high degree of accuracy of the simpler Laplace form. The Laplace solution is then verified against experimental data from BTEX chromatography. This novel method, which involves solving a single equation and fitting parameters in pairs for individual components, is highly efficient. It is significantly faster and simpler than the full numerical solution and avoids the computationally expensive methods that would normally be used to fit all curves at the same time.

The origin of a chemical reaction between two reactant atoms is associated to the activation energy, with the assumption that, high-energy collisions between these atoms, are the ones that overcome the activation energy. Here, we (i) show that a stronger attractive van der Waals (vdW) and electron-ion Coulomb interactions between two polarized atoms are responsible to initiate a chemical reaction, either before or after the collision. We derive this stronger vdW attraction formula exactly using the quasi one-dimensional Drude model within the ionization energy theory and the energy-level spacing renormalization group method. Along the way, we (ii) expose the precise physical mechanism responsible for the existence of a stronger vdW interaction for both long and short distances, and also show how to technically avoid the electron-electron Coulomb repulsion between polarized electrons from these two reactant atoms. Finally, we properly and correctly associate the existence of this stronger attraction to Ramachandran's 'normal limits' (distance shorter than what is allowed by the standard vdW bond) between chemically nonbonded atoms.

Chemical transport models (CTMs), which simulate air pollution transport, transformation, and removal, are computationally expensive, largely because of the computational intensity of the chemical mechanisms: systems of coupled differential equations representing atmospheric chemistry. Here we investigate the potential for machine learning to reproduce the behavior of a chemical mechanism, yet with reduced computational expense. We create a 17-layer residual multi-target regression neural network to emulate the Carbon Bond Mechanism Z (CBM-Z) gas-phase chemical mechanism. We train the network to match CBM-Z predictions of changes in concentrations of 77 chemical species after one hour, given a range of chemical and meteorological input conditions, which it is able to do with root-mean-square error (RMSE) of less than 1.97 ppb (median RMSE = 0.02 ppb), while achieving a 250x computational speedup. An additional 17x speedup (total 4250x speedup) is achieved by running the neural network on a graphics-processing unit (GPU). The neural network is able to reproduce the emergent behavior of the chemical system over diurnal cycles using Euler integration, but additional work is needed to constrain the propagation of errors as simulation time progresses.

Astrochemical models of interstellar clouds, the sites of stars, and planet formation require information about spin-state chemistry to allow quantitative comparison with spectroscopic observations. In particular, it is important to know if full scrambling or H abstraction (also known as proton hopping) takes place in ion-neutral reactions. The reaction of Cl+ and HCl+ with H2 and isotopologues has been studied at cryogenic temperatures between 20 and 180 K using a 22 pole radio frequency ion trap. Isotopic exchange processes are used to probe the reaction mechanism of the HCl+ + H2 reaction. The results are compared with previous measurements and theoretical predictions. The rate coefficients for the Cl+ + H2 and HCl+ + H2 reactions are found to be constant in the range of temperatures studied, except for the DCl+ + D2 reaction, where a weak negative temperature dependence is observed, and reactions with D2 are found to be significantly slower than the Langevin rate. No isotopic exchange reactions are observed to occur for the H2Cl+ ion. The analysis of the products of the HCl+ + H2 isotopic system clearly indicates that the reaction proceeds via simple hydrogen atom abstraction.

Large language models (LLMs) have gained widespread interest due to their ability to process human language and perform tasks on which they have not been explicitly trained. This is relevant for the chemical sciences, which face the problem of small and diverse datasets that are frequently in the form of text. LLMs have shown promise in addressing these issues and are increasingly being harnessed to predict chemical properties, optimize reactions, and even design and conduct experiments autonomously. However, we still have only a very limited systematic understanding of the chemical reasoning capabilities of LLMs, which would be required to improve models and mitigate potential harms. Here, we introduce "ChemBench," an automated framework designed to rigorously evaluate the chemical knowledge and reasoning abilities of state-of-the-art LLMs against the expertise of human chemists. We curated more than 7,000 question-answer pairs for a wide array of subfields of the chemical sciences, evaluated leading open and closed-source LLMs, and found that the best models outperformed the best human chemists in our study on average. The models, however, struggle with some chemical reasoning tasks that are easy for human experts and provide overconfident, misleading predictions, such as about chemicals' safety profiles. These findings underscore the dual reality that, although LLMs demonstrate remarkable proficiency in chemical tasks, further research is critical to enhancing their safety and utility in chemical sciences. Our findings also indicate a need for adaptations to chemistry curricula and highlight the importance of continuing to develop evaluation frameworks to improve safe and useful LLMs.

Advanced observational facilities allow to trace back the chemical evolution of the Universe, on the one hand, from local objects of different ages and, secondly, by direct observations of redshifted objects. The chemical enrichment serves as one of the cornerstones of cosmological evolution. In order to understand this chemical evolution in morphologically different astrophysical objects models are constructed based on analytical descriptions or numerical methods. For the comparison of their chemical issues, as there are element abundances, gradients, and ratios, with observations not only the present-day values are used but also their temporal evolution from the first era of metal enrichment. Here we will provide some insight into basics of chemical evolution models, highlight advancements, and discuss a few applications.

A physically motivated equation that determines the number of electrons of a molecule is proposed based on chemical common sense. It shows that all molecules are entangled in the number of electrons and results in the fundamental assumption of molecular energy convexity that underpins molecular quantum mechanics. The proposed physical principle includes the molecular size consistency principle as a special case. Application of wavefunction theory to the principle shows that an individual molecule with a noninteger number of electrons is locally physical albeit locally unreal. The energy of a molecule is piecewise linear with respect to its continuous number of electrons. The continuity of the number of electrons allows the definition of an electronic chemical potential of a single molecule. A state function equivalent to the energy of a molecule can be defined using the chemical potential as a variable. The aforementioned physical principle can alternatively be expressed as a simple additivity with the new state function. The latter also shows that the quantum entanglement in the number of electrons can be viewed as all molecules sharing the same chemical potential.

The stars of the Milky Way carry the chemical history of our Galaxy in their atmospheres as they journey through its vast expanse. Like barcodes, we can extract the chemical fingerprints of stars from high-resolution spectroscopy. The fourth data release (DR4) of the Galactic Archaeology with HERMES (GALAH) Survey, based on a decade of observations, provides the chemical abundances of up to 32 elements for 917 588 stars that also have exquisite astrometric data from the Gaia satellite. For the first time, these elements include life-essential nitrogen to complement carbon, and oxygen as well as more measurements of rare-earth elements critical to modern-life electronics, offering unparalleled insights into the chemical composition of the Milky Way. For this release, we use neural networks to simultaneously fit stellar parameters and abundances across the whole wavelength range, leveraging synthetic grids computed with Spectroscopy Made Easy. These grids account for atomic line formation in non-local thermodynamic equilibrium for 14 elements. In a two-iteration process, we first fit stellar labels to all 1 085 520 spectra, then co-add repeated observations and refine these labels using astrometric data from Gaia and 2MASS photometry, improving the accuracy and precision of stellar parameters and abundances. Our validation thoroughly assesses the reliability of spectroscopic measurements and highlights key caveats. GALAH DR4 represents yet another milestone in Galactic archaeology, combining detailed chemical compositions from multiple nucleosynthetic channels with kinematic information and age estimates. The resulting dataset, covering nearly a million stars, opens new avenues for understanding not only the chemical and dynamical history of the Milky Way, but also the broader questions of the origin of elements and the evolution of planets, stars, and galaxies.

Solar photospheric abundances and CI-chondrite compositions are reviewed and updated to obtain representative solar system abundances of the elements and their isotopes. The new photospheric abundances obtained here lead to higher solar metallicity. Full 3D NLTE photospheric analyses are only available for 11 elements. A quality index for analyses is introduced. For several elements, uncertainties remain large. Protosolar mass fractions are H (X = 0.7060), He (Y = 0.2753), and for metals Li to U (Z = 0.0187). The protosolar (C+N)/H agrees within 13% with the ratio for the solar core from the Borexino experiment. Elemental abundances in CI-chondrites were screened by analytical methods, sample sizes, and evaluated using concentration frequency distributions. Aqueously mobile elements (e.g., alkalis, alkaline earths, etc.) often deviate from normal distributions indicating mobilization and/or sequestration into carbonates, phosphates, and sulfates. Revised CI-chondrite abundances of non-volatile elements are similar to earlier estimates. The moderately volatile elements F and Sb are higher than before, as are C, Br and I, whereas the CI-abundances of Hg and N are now significantly lower. The solar system nuclide distribution curves of s-process elements agree within 4% with s-process predictions of Galactic chemical evolution models. P-process nuclide distributions are assessed. No obvious correlation of CI-chondritic to solar elemental abundance ratios with condensation temperatures is observed, nor is there one for ratios of CI-chondrites/solar wind abundances.

Although large language models (LLMs) have significant potential to advance chemical discovery, current LLMs lack core chemical knowledge, produce unreliable reasoning trajectories, and exhibit suboptimal performance across diverse chemical tasks. To address these challenges, we propose Chem-R, a generalizable Chemical Reasoning model designed to emulate the deliberative processes of chemists. Chem-R is trained through a three-phase framework that progressively builds advanced reasoning capabilities, including: 1) Chemical Foundation Training, which establishes core chemical knowledge. 2) Chemical Reasoning Protocol Distillation, incorporating structured, expert-like reasoning traces to guide systematic and reliable problem solving. 3) Multi-task Group Relative Policy Optimization that optimizes the model for balanced performance across diverse molecular- and reaction-level tasks. This structured pipeline enables Chem-R to achieve state-of-the-art performance on comprehensive benchmarks, surpassing leading large language models, including Gemini-2.5-Pro and DeepSeek-R1, by up to 46% on molecular tasks and 66% on reaction tasks. Meanwhile, Chem-R also consistently outperforms the existing chemical foundation models across both molecular and reaction level tasks. These results highlight Chem-R's robust generalization, interpretability, and potential as a foundation for next-generation AI-driven chemical discovery.

Tunnelling reactions of molecules embedded on cryogenic noble-gas matrices are being used in fundamental studies of how reactivity varies with the nature of the supposedly inert matrix as well as pointers to the chemistry occurring in the interstellar medium on ice-grains. To these ends we present chemical kinetic rate constants for the cis to trans isomerisation of seleno-, thio- and monomeric formic acids and that of their three dimeric species, based on multidimensional calculations in the gas-phase, from 10~K to 300~K as a guide to the matrix reactions.

The demand for safe, high-energy-density batteries has spotlighted halide solid-state electrolytes, which offer the potential for enhanced ionic mobility, electrochemical stability, and interfacial deformability. Accelerating their discovery requires extensive molecular dynamics, which has been increasingly enabled by universal machine learning interatomic potentials trained on foundational datasets. However, the dynamic softness of halides poses a stringent test of whether general-purpose models can reliably replace first-principles calculations under the highly distorted, elevated-temperature regimes necessary to probe ion transport. Here, we present AQVolt26, a dataset of 322,656 r^2SCAN single-point calculations for lithium halides, generated via high-temperature configurational sampling across sim5K structures. We demonstrate that foundational datasets provide a strong baseline for stable halide chemistries and transfer local forces well, however absolute energy predictions degrade in distorted higher-temperature regimes. Co-training with AQVolt26 resolves this blind spot. Furthermore, incorporating Materials Project relaxation data improves near-equilibrium performance but degrades extreme-strain robustness without enhancing high-temperature force accuracy. These results demonstrate that domain-specific configurational sampling is essential for the reliable dynamic screening of halide electrolytes. Furthermore, our findings suggest that while foundational models provide a robust base, they are most effective for dynamically soft solid-state chemistries when augmented with targeted, high-temperature data. Finally, we show that near-equilibrium relaxation data serves as a task-specific complement rather than a universally beneficial addition.

Chemical reasoning usually involves complex, multi-step processes that demand precise calculations, where even minor errors can lead to cascading failures. Furthermore, large language models (LLMs) encounter difficulties handling domain-specific formulas, executing reasoning steps accurately, and integrating code effectively when tackling chemical reasoning tasks. To address these challenges, we present ChemAgent, a novel framework designed to improve the performance of LLMs through a dynamic, self-updating library. This library is developed by decomposing chemical tasks into sub-tasks and compiling these sub-tasks into a structured collection that can be referenced for future queries. Then, when presented with a new problem, ChemAgent retrieves and refines pertinent information from the library, which we call memory, facilitating effective task decomposition and the generation of solutions. Our method designs three types of memory and a library-enhanced reasoning component, enabling LLMs to improve over time through experience. Experimental results on four chemical reasoning datasets from SciBench demonstrate that ChemAgent achieves performance gains of up to 46% (GPT-4), significantly outperforming existing methods. Our findings suggest substantial potential for future applications, including tasks such as drug discovery and materials science. Our code can be found at https://github.com/gersteinlab/chemagent

[Abridged] This review paper discussed which chemical effects may be at play in a planet-forming disk midplane, which effects are relevant under different conditions, and which tools are available for modelling chemical kinetics in a disk midplane. The review goes on to discuss some important efforts in the planet formation modelling community to treat chemical evolution, and, vice versa, efforts in the chemical modelling community to implement more physical effects related to planet formation into the chemical modelling. The aim of this review is both to outline some concepts related to planet formation chemistry, but also to encourage, not just collaboration between the planet formation modelling community and the astrochemical community, but also assistance and guidance from one community to the other. Guidance, regarding which effects, out of many, might be more relevant than others under certain planet formation conditions, and regarding why certain included effects lead to certain important modelling outcomes. As the research fields of exoplanet atmospheres and protoplanetary disks near new frontiers in observational insights with upcoming facilities, developing appropriate modelling frameworks (including physical and chemical effects) is paramount to ultimately enable the linking of a chemically characterised exoplanet atmospheres to its formation history in its natal protoplanetary disk.

Many chemical concepts can be well defined in the context of quantum chemical theories. Examples are the electronegativity scale of Mulliken and Jaffe and the hard and soft acids and bases concept of Pearson. The sound theoretical basis allows for a systematic definition of such concepts. However, while they are often used to describe and compare chemical processes in terms of reactivity, their predictive power remains unclear. In this work, we elaborate on the predictive potential of chemical reactivity concepts, which can be crucial for autonomous reaction exploration protocols to guide them by first-principles heuristics that expoit these concepts.

The chemical reaction recommendation is to select proper reaction condition parameters for chemical reactions, which is pivotal to accelerating chemical science. With the rapid development of large language models (LLMs), there is growing interest in leveraging their reasoning and planning capabilities for reaction condition recommendation. Despite their success, existing methods rarely explain the rationale behind the recommended reaction conditions, limiting their utility in high-stakes scientific workflows. In this work, we propose ChemMAS, a multi-agent system that reframes condition prediction as an evidence-based reasoning task. ChemMAS decomposes the task into mechanistic grounding, multi-channel recall, constraint-aware agentic debate, and rationale aggregation. Each decision is backed by interpretable justifications grounded in chemical knowledge and retrieved precedents. Experiments show that ChemMAS achieves 20-35% gains over domain-specific baselines and outperforms general-purpose LLMs by 10-15% in Top-1 accuracy, while offering falsifiable, human-trustable rationales, which establishes a new paradigm for explainable AI in scientific discovery.

We continue study of equilibrium of two species of 2d coulomb charges (or point vortices in 2d ideal fluid) started in Lv. Although for two species of vortices with circulation ratio -1 the relationship between the equilibria and the factorization/Darboux transformation of the Schrodinger operator was established a long ago, the question about similar relationship for the ratio -2 remained unanswered. Here we present the answer.

Chemical potential of species in solution is essential for understanding various chemical processes at interfaces. Molecular dynamics (MD) simulations, constrained by fixed compositions, cannot satisfy a constant chemical potential condition as solute species can migrate to the interface and deplete the bulk due to solute-interface interactions. In this study, we introduce a simple and computationally efficient approach named iterative constant chemical potential molecular dynamics (iCuMD) simulation, which helps simulate targeted molar concentrations of species in solution. iCuMD overcomes the limitations of conventional MD by adjusting the number of species in the solution to reach a target concentration (chemical potential). We demonstrate our approach using solid-liquid and liquid-air interfacial systems as case studies. Specifically, we perform classical force field-based MD simulations of NaCl(aq)-air and NaCl(aq)-graphite interfaces and machine learning interatomic potential (MLIP)-based MD simulations of the Na2SO4(aq)-graphene interface. Our results show that the iCuMD approach efficiently achieves the desired bulk ion concentration within two iterations and can also be integrated with MLIP-driven simulations which enable constant potential simulations with DFT-level accuracy. We show that iCuMD offers a robust and simple computational framework for constant chemical potential simulations as its only requirement is to be able to converge interfacial simulations with a measurable bulk region.

Boltzmann generators approach the sampling problem in many-body physics by combining a normalizing flow and a statistical reweighting method to generate samples in thermodynamic equilibrium. The equilibrium distribution is usually defined by an energy function and a thermodynamic state. Here we propose temperature-steerable flows (TSF) which are able to generate a family of probability densities parametrized by a choosable temperature parameter. TSFs can be embedded in generalized ensemble sampling frameworks to sample a physical system across multiple thermodynamic states.

The two-body problem of variational electrodynamics possesses differential-delay equations of motion with state-dependent delays of neutral type and solutions that can have velocity discontinuities on countable sets. From a periodic orbit possessing some mild properties at breaking points, we define a synchronization function in R x R3, which is further used to construct two bounded oscillatory functions vanishing at breaking points and whose first derivatives are continuous and defined everywhere but at breaking points. The oscillatory functions are associated with a PDE identity in H2(R3), and we postulate ordering conditions for the PDE identity to define a Fredholm-Schroedinger operator with an O(1/r2) spin-orbit forcing term belonging to L2(R3). As an application, we introduce the Chemical Principle criterion to select orbits with asymptotically vanishing far-fields and estimate the Bohr radius parameter of the Fredholm-Schroedinger PDE using the boundary-layer of orbits chosen according to the Chemical Principle criterion. Last, working backward, we derive a Chemical Principle-like condition from the ordering conditions.

The Mean Spherical Approximation (MSA) is a commonly-used thermodynamic theory for computing the energetics of ions in the primitive model (i.e., charged hard-sphere ions in a background dielectric). For the excess chemical potential, however, the early MSA formulations (which were widely adopted) only included the terms needed to compute the mean excess chemical potential (or the mean activity coefficient). Other terms for the chemical potential μ_i of individual species i were not included because they sum to 0 in the mean chemical potential. Here, we derive these terms to give a complete MSA formulation of the chemical potential. The result is a simple additive term for μ_i that we show is a qualitative improvement over the previous MSA version. In addition, our derivation shows that the MSA's assumption of global charge neutrality is not strictly necessary, so that the MSA is also valid for systems close to neutrality.

The interstellar medium (ISM) is all but empty. To date, more than 300 molecules have already been discovered. Because of the extremely low temperature, the gas-phase chemistry is dominated by barrierless exothermic reactions of radicals and ions. However, several abundant molecules and organic molecules cannot be produced efficiently by gas-phase reactions. To explain the existence of such molecules in the ISM, gas-surface interactions between small molecules and dust particles covered with amorphous solid water (ASW) mantles must be considered. In general, surface processes such as adsorption, diffusion, desorption, and chemical reactions can be linked to the binding energy of molecules to the surface. Hence, a lot of studies have been performed to identify the binding energies of interstellar molecules on ASW surfaces. Cosmic radiation and free electrons may induce a negative charge on the dust particles, and the binding energies may be affected by this charge. In this study, we calculate the binding energies of CO, CH4, and NH3, on neutral and charged ASW surfaces using DFT calculations. Our results indicate that CO can interact with the surface charge, increasing its binding energy. In contrast, the binding energy of CH4 remains unchanged in the presence of surface charge, and that of NH3 typically decreases.

We formulate nonequilibrium thermodynamics in which intensive variables acquire operational meaning through measurement protocols consistent with local reciprocity. Using physical equilibrium as a reference, conjugate observables are constructed by continuously adjusting devices along the local tangent space of the statistical manifold. In this relativity of observation, Onsager reciprocity holds locally, allowing inference-based Lagrange multipliers to be directly measured. This provides a systematic method to extend operational definitions of intensive variables to nonequilibrium states, highlighting their context-dependent nature and offering a concrete experimental strategy.

Question Answering (QA) effectively evaluates language models' reasoning and knowledge depth. While QA datasets are plentiful in areas like general domain and biomedicine, academic chemistry is less explored. Chemical QA plays a crucial role in both education and research by effectively translating complex chemical information into readily understandable format. Addressing this gap, we introduce ScholarChemQA, a large-scale QA dataset constructed from chemical papers. This dataset reflects typical real-world challenges, including an imbalanced data distribution and a substantial amount of unlabeled data that can be potentially useful. Correspondingly, we introduce a QAMatch model, specifically designed to effectively answer chemical questions by fully leveraging our collected data. We first address the issue of imbalanced label distribution by re-weighting the instance-wise loss based on the inverse frequency of each class, ensuring minority classes are not dominated by majority ones during optimization. Next, we utilize the unlabeled data to enrich the learning process, generating a variety of augmentations based on a SoftMix operation and ensuring their predictions align with the same target, i.e., pseudo-labels. To ensure the quality of the pseudo-labels, we propose a calibration procedure aimed at closely aligning the pseudo-label estimates of individual samples with a desired ground truth distribution. Experiments show that our QAMatch significantly outperforms the recent similar-scale baselines and Large Language Models (LLMs) not only on our ScholarChemQA dataset but also on four benchmark datasets. We hope our benchmark and model can facilitate and promote more research on chemical QA.

Foundation models have shown remarkable success across scientific domains, yet their impact in chemistry remains limited due to the absence of diverse, large-scale, high-quality datasets that reflect the field's multifaceted nature. We present the ChemPile, an open dataset containing over 75 billion tokens of curated chemical data, specifically built for training and evaluating general-purpose models in the chemical sciences. The dataset mirrors the human learning journey through chemistry -- from educational foundations to specialized expertise -- spanning multiple modalities and content types including structured data in diverse chemical representations (SMILES, SELFIES, IUPAC names, InChI, molecular renderings), scientific and educational text, executable code, and chemical images. ChemPile integrates foundational knowledge (textbooks, lecture notes), specialized expertise (scientific articles and language-interfaced data), visual understanding (molecular structures, diagrams), and advanced reasoning (problem-solving traces and code) -- mirroring how human chemists develop expertise through diverse learning materials and experiences. Constructed through hundreds of hours of expert curation, the ChemPile captures both foundational concepts and domain-specific complexity. We provide standardized training, validation, and test splits, enabling robust benchmarking. ChemPile is openly released via HuggingFace with a consistent API, permissive license, and detailed documentation. We hope the ChemPile will serve as a catalyst for chemical AI, enabling the development of the next generation of chemical foundation models.

We prove stability for a class of heterogeneous catalysis models in the L_p-setting. We consider a setting in a finite three-dimensional pore of cylinder-like geometry, with the lateral walls acting as a catalytic surface. Under a reasonable condition on the involved parameters, we show that given equilibria are normally stable, i.e. solutions are attracted at an exponential rate. The potential incidence of instability is discussed as well.

We present a method for computing free-energy differences using thermodynamic integration with a neural network potential that interpolates between two target Hamiltonians. The interpolation is defined at the sample distribution level, and the neural network potential is optimized to match the corresponding equilibrium potential at every intermediate time-step. Once the interpolating potentials and samples are well-aligned, the free-energy difference can be estimated using (neural) thermodynamic integration. To target molecular systems, we simultaneously couple Lennard-Jones and electrostatic interactions and model the rigid-body rotation of molecules. We report accurate results for several benchmark systems: a Lennard-Jones particle in a Lennard-Jones fluid, as well as the insertion of both water and methane solutes in a water solvent at atomistic resolution using a simple three-body neural-network potential.

Accurate prediction of atomistic, thermodynamic, and kinetic properties from molecular structures underpins materials innovation. Existing computational and experimental approaches lack the scalability required to efficiently navigate chemical space. Scientific foundation models trained on large unlabeled datasets offer a path toward exploring chemical space across diverse application domains. Here we develop MIST, a family of molecular foundation models with up to an order of magnitude more parameters and data than prior works. Trained using a novel tokenization scheme that comprehensively captures nuclear, electronic, and geometric information, MIST learns from a diverse range of molecules. MIST models have been fine-tuned to predict more than 400 structure -- property relationships and match or exceed state-of-the-art performance across benchmarks spanning physiology, electrochemistry, and quantum chemistry. We demonstrate the ability of these models to solve real-world problems across chemical space, including multiobjective electrolyte solvent screening, olfactory perception mapping, isotope half-life prediction, stereochemical reasoning for chiral organometallic compounds, and binary and multi-component mixture property prediction. Probing MIST models using mechanistic interpretability methods reveals identifiable patterns and trends not explicitly present in the training data, suggesting that the models learn generalizable scientific concepts. We formulate hyperparameter-penalized Bayesian neural scaling laws and use them to reduce the computational cost of model development by an order of magnitude. The methods and findings presented here represent a significant step toward accelerating materials discovery, design, and optimization using foundation models and provide valuable guidance for training compute-optimal scientific foundation models.

Hiding an object in a chemical gradient requires to suppress the distortions it would naturally cause on it. To do so, we propose a strategy based on coating the object with a chemical reaction-diffusion network which can act as an active cloaking device. By controlling the concentration of some species in its immediate surrounding, the chemical reactions redirect the gradient as if the object was not there. We also show that a substantial fraction of the energy required to cloak can be extracted from the chemical gradient itself.

Accurate thermochemical data with sub-chemical accuracy (i.e., within pm1 kcal mol^{-1} from sufficiently accurate experimental or theoretical reference data) is essential for the development and improvement of computational chemistry methods. Challenging thermochemical properties such as heats of formation and total atomization energies (TAEs) are of particular interest because they rigorously test the ability of computational chemistry methods to accurately describe complex chemical transformations involving multiple bond rearrangements. Yet, existing thermochemical datasets that confidently reach this level of accuracy are limited in either size or scope. Datasets with highly accurate reference values include a small number of data points, and larger datasets provide less accurate data or only cover a narrow portion of the chemical space. The existing datasets are therefore insufficient for developing data-driven methods with predictive accuracy over a large chemical space. The Microsoft Research Accurate Chemistry Collection (MSR-ACC) will address this challenge. Here, it offers the MSR-ACC/TAE25 dataset of 76,879 total atomization energies obtained at the CCSD(T)/CBS level via the W1-F12 thermochemical protocol. The dataset is constructed to exhaustively cover chemical space for all elements up to argon by enumerating and sampling chemical graphs, thus avoiding bias towards any particular subspace of the chemical space (such as drug-like, organic, or experimentally observed molecules). With this first dataset in MSR-ACC, we enable data-driven approaches for developing predictive computational chemistry methods with unprecedented accuracy and scope.

We report a series of deep learning models to solve complex forward and inverse design problems in molecular modeling and design. Using both diffusion models inspired by nonequilibrium thermodynamics and attention-based transformer architectures, we demonstrate a flexible framework to capture complex chemical structures. First trained on the QM9 dataset and a series of quantum mechanical properties (e.g. homo, lumo, free energy, heat capacity, etc.), we then generalize the model to study and design key properties of deep eutectic solvents. In addition to separate forward and inverse models, we also report an integrated fully prompt-based multi-task generative pretrained transformer model that solves multiple forward, inverse design, and prediction tasks, flexibly and within one model. We show that the multi-task generative model has the overall best performance and allows for flexible integration of multiple objectives, within one model, and for distinct chemistries, suggesting that synergies emerge during training of this large language model. Trained jointly in tasks related to the QM9 dataset and deep eutectic solvents (DESs), the model can predict various quantum mechanical properties and critical properties to achieve deep eutectic solvent behavior. Several novel combinations of DESs are proposed based on this framework.

In this work, we explore two classes of density dependent relativistic mean-field models, their predictions of proton fractions at high densities and neutron star structure. We have used a metamodelling approach to these relativistic density functionals. We have generated a large ensemble of models with these classes and then applied constraints from theoretical and experimental nuclear physics and astrophysical observations. We find that both models produce similar equations of state and neutron star mass-radius sequences. But, their underlying compositions, denoted by the proton fraction in this case, are vastly different. This reinstates previous findings that information on composition gets masqueraded in beta-equilibrium. Additional observations of non-equilibrium phenomena are necessary to pin it down.

The task of chemical reaction predictions (CRPs) plays a pivotal role in advancing drug discovery and material science. However, its effectiveness is constrained by the vast and uncertain chemical reaction space and challenges in capturing reaction selectivity, particularly due to existing methods' limitations in exploiting the data's inherent knowledge. To address these challenges, we introduce a data-curated self-feedback knowledge elicitation approach. This method starts from iterative optimization of molecular representations and facilitates the extraction of knowledge on chemical reaction types (RTs). Then, we employ adaptive prompt learning to infuse the prior knowledge into the large language model (LLM). As a result, we achieve significant enhancements: a 14.2% increase in retrosynthesis prediction accuracy, a 74.2% rise in reagent prediction accuracy, and an expansion in the model's capability for handling multi-task chemical reactions. This research offers a novel paradigm for knowledge elicitation in scientific research and showcases the untapped potential of LLMs in CRPs.

The independent atom ansatz of density functional theory yields an accurate analytical expression for dynamic correlation energy in the H_{2} molecule: E_{c} = 0.5(1 - 2)(ab|ba) for the atom-additive self-consistent density rho = |a|^{2} + |b|^{2}. Combined with exact atomic self-exchange, it recovers more than 99.5 % of nearly exact SCAN exchange-correlation energy at R > 0.5 A, differing by less than 0.12 eV. The total energy functional correctly dissociates the H-H bond and yields absolute errors of 0.002 A, 0.19 eV, and 13 cm^{-1} relative to experiment at the tight binding computational cost. The chemical bond formation is attributed to the asymptotic Heitler-London resonance of quasi-orthogonal atomic states (- (ab|ba)) with no contributions from kinetic energy or charge accumulation in the bond.

"Pasta alla Cacio e pepe" is a traditional Italian dish made with pasta, pecorino cheese, and pepper. Despite its simple ingredient list, achieving the perfect texture and creaminess of the sauce can be challenging. In this study, we systematically explore the phase behavior of Cacio and pepe sauce, focusing on its stability at increasing temperatures for various proportions of cheese, water, and starch. We identify starch concentration as the key factor influencing sauce stability, with direct implications for practical cooking. Specifically, we delineate a regime where starch concentrations below 1% (relative to cheese mass) lead to the formation of system-wide clumps, a condition determining what we term the "Mozzarella Phase" and corresponding to an unpleasant and separated sauce. Additionally, we examine the impact of cheese concentration relative to water at a fixed starch level, observing a lower critical solution temperature that we theoretically rationalized by means of a minimal effective free-energy model. Finally, we present a scientifically optimized recipe based on our findings, enabling a consistently flawless execution of this classic dish.

Olympiad-level benchmarks in mathematics and physics are crucial testbeds for advanced AI reasoning, but chemistry, with its unique multimodal symbolic language, has remained an open challenge. We introduce ChemO, a new benchmark built from the International Chemistry Olympiad (IChO) 2025. ChemO features two key innovations for automated assessment: Assessment-Equivalent Reformulation (AER), which converts problems requiring visual outputs (e.g., drawing molecules) into computationally tractable formats, and Structured Visual Enhancement (SVE), a diagnostic mechanism to disentangle a model's visual perception capabilities from its core chemical reasoning. To tackle this benchmark, we propose ChemLabs, a hierarchical multi-agent framework that mimics human expert collaboration through specialized agents for problem decomposition, perception, reasoning, and auditing. Experiments on state-of-the-art multimodal models demonstrate that combining SVE with our multi-agent system yields dramatic performance gains. Our top configuration achieves a score of 93.6 out of 100, surpassing an estimated human gold medal threshold and establishing a new state-of-the-art in automated chemical problem-solving. ChemO Dataset: https://huggingface.co/datasets/IDEA-AI4SCI/ChemO

We discuss the use of tunneling electron current to control and catalyze chemical reactions. Assuming the separation of time scales for electronic and nuclear dynamics we employ the Langevin equation for the reaction coordinate. The Langevin equation contains current-induced forces and is used to define nonequilibrium, effective potential energy surface for current-carrying molecular systems. The current-induced forces are computed via Keldysh nonequilibrium Green's functions. Once the nonequilibrium, current-depended potential energy surface is defined, the chemical reaction is modeled as an escape of a Brownian particle from the potential well. We demonstrate that the barrier between the reactant and the product states can be controlled by the bias voltage. When the molecule is asymmetrically coupled to the electrodes, the reaction can be catalyzed or stopped depending on the polarity of the tunneling current.

Over the last decades, excellent computational chemistry tools have been developed. Their full potential has not yet been reached as most are challenging to learn and exist in isolation. Recently, large-language models (LLMs) have shown strong performance in tasks across domains, but struggle with chemistry-related problems. Moreover, these models lack access to external knowledge sources, limiting their usefulness in scientific applications. In this study, we introduce ChemCrow, an LLM chemistry agent designed to accomplish tasks across organic synthesis, drug discovery, and materials design. By integrating 17 expert-designed tools, ChemCrow augments the LLM performance in chemistry, and new capabilities emerge. Our agent autonomously planned the syntheses of an insect repellent, three organocatalysts, as well as other relevant molecules. Our evaluation, including both LLM and expert assessments, demonstrates ChemCrow's effectiveness in automating a diverse set of chemical tasks. Surprisingly, we find that GPT-4 as an evaluator cannot distinguish between clearly wrong GPT-4 completions and Chemcrow's performance. There is a significant risk of misuse of tools like ChemCrow, and we discuss their potential harms. Employed responsibly, our work not only aids expert chemists and lowers barriers for non-experts, but also fosters scientific advancement by bridging the gap between experimental and computational chemistry. A subset of the code is publicly available at https://github.com/ur-whitelab/chemcrow-public.

Metallic alloys often form phases - known as solid solutions - in which chemical elements are spread out on the same crystal lattice in an almost random manner. The tendency of certain chemical motifs to be more common than others is known as chemical short-range order (SRO) and it has received substantial consideration in alloys with multiple chemical elements present in large concentrations due to their extreme configurational complexity (e.g., high-entropy alloys). Short-range order renders solid solutions "slightly less random than completely random", which is a physically intuitive picture, but not easily quantifiable due to the sheer number of possible chemical motifs and their subtle spatial distribution on the lattice. Here we present a multiscale method to predict and quantify the SRO state of an alloy with atomic resolution, incorporating machine learning techniques to bridge the gap between electronic-structure calculations and the characteristic length scale of SRO. The result is an approach capable of predicting SRO length scale in agreement with experimental measurements while comprehensively correlating SRO with fundamental quantities such as local lattice distortions. This work advances the quantitative understanding of solid-solution phases, paving the way for SRO rigorous incorporation into predictive mechanical and thermodynamic models.

Active matter systems, from self-propelled colloids to motile bacteria, are characterized by the conversion of free energy into useful work at the microscopic scale. These systems generically involve physics beyond the reach of equilibrium statistical mechanics, and a persistent challenge has been to understand the nature of their nonequilibrium states. The entropy production rate and the magnitude of the steady-state probability current provide quantitative ways to do so by measuring the breakdown of time-reversal symmetry and the strength of nonequilibrium transport of measure. Yet, their efficient computation has remained elusive, as they depend on the system's unknown and high-dimensional probability density. Here, building upon recent advances in generative modeling, we develop a deep learning framework that estimates the score of this density. We show that the score, together with the microscopic equations of motion, gives direct access to the entropy production rate, the probability current, and their decomposition into local contributions from individual particles, spatial regions, and degrees of freedom. To represent the score, we introduce a novel, spatially-local transformer-based network architecture that learns high-order interactions between particles while respecting their underlying permutation symmetry. We demonstrate the broad utility and scalability of the method by applying it to several high-dimensional systems of interacting active particles undergoing motility-induced phase separation (MIPS). We show that a single instance of our network trained on a system of 4096 particles at one packing fraction can generalize to other regions of the phase diagram, including systems with as many as 32768 particles. We use this observation to quantify the spatial structure of the departure from equilibrium in MIPS as a function of the number of particles and the packing fraction.